Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
谷口 良徳; 三原 武; 垣内 一雄; 宇田川 豊
Annals of Nuclear Energy, 195, p.110144_1 - 110144_11, 2024/01
被引用回数：0 パーセンタイル：0.01(Nuclear Science & Technology)A reactivity-initiated accident (RIA)-simulated test CN-1 on a high-burnup 64 GWd/t mixed-oxide fuel rod sheathed with M5
cladding was conducted at the Nuclear Safety Research Reactor, resulting in fuel failure. A small opening with slight ballooning deformation characterized the post-test visual appearance of the test fuel rod. Simulation using fuel performance codes FEMAXI-8/RANNS predicted rod survival under early phase loading induced by pellet-cladding mechanical interaction and subsequent boiling transition, and the cladding surface temperature measured online confirmed the occurrence of boiling transition. The experimental observation and simulation indicate that the failure was caused by a high-temperature rupture following increased rod-internal pressure. The RANNS sensitivity analysis revealed that a mechanical state parameter dedicated to predicting plastic instability might be an effective index for evaluating the risk of rupture failure during RIAs.
天谷 政樹
High Temperature Corrosion of Materials, 15 Pages, 2024/00
被引用回数：0 パーセンタイル：0.04(Metallurgy & Metallurgical Engineering)Zirconium (Zr)-based alloys are widely used as fuel cladding material for light water reactors. Under a loss-of-coolant accident (LOCA) condition, the oxidation of fuel cladding by high-temperature steam induces the degradation of mechanical properties of the cladding and would affect the integrity of fuel rods and/or assemblies, etc., during LOCA. In this study, the distribution of the elements (zirconium, oxygen, tin, iron and chromium) in Zircaloy-4 cladding specimens oxidized in the temperature range of 
1350- 1700 K in steam was analyzed along the radial direction of the specimens by using SEM/EPMA, and the cause of element distribution in the specimens was discussed in consideration of the morphology of precipitates in the specimens and hypothesized phase diagrams related to the elements contained in the specimens. The form of the particles precipitated and the comparison between SEM/EPMA results and hypothesized phase diagrams of Zr-Sn-O system suggested that the liquefaction of tin-rich material and/or Zr-(Fe,Cr) compounds occurred during the oxidation test. The results obtained indicate that Zircaloy-4 cladding tubes would start melting at the melting point of tin-oxide and the eutectic point of Zr-(Fe,Cr)compounds, which is much lower than the melting point of Zr, 
-Zr(O), or zirconium oxide (ZrO
).
成川 隆文; 近藤 啓悦; 藤村 由希; 垣内 一雄; 宇田川 豊; 根本 義之
Journal of Nuclear Materials, 587, p.154736_1 - 154736_8, 2023/12
被引用回数：1 パーセンタイル：0.01(Materials Science, Multidisciplinary)To evaluate the oxidation and embrittlement behavior of an oxide-dispersion-strengthened FeCrAl (FeCrAl-ODS) cladding tube under loss-of-coolant accident (LOCA) conditions, we conducted isothermal oxidation and ring-compression tests on unirradiated, stress-relieved FeCrAl-ODS cladding tube specimens. Further, we discussed the loss of coolable geometry of the reactor core loaded with the FeCrAl-ODS cladding tubes under LOCA conditions, using data from the ring-compression tests in this study and the integral thermal shock tests from our previous study. The results reveal that oxidation kinetics of the FeCrAl-ODS cladding tube at 1523 K is four orders of magnitude lower than that of a conventional Zircaloy cladding tube, which highlights the exceptional oxidation resistance of the FeCrAl-ODS cladding tube. The breakaway oxidation of the FeCrAl-ODS cladding tube was observed at 1623 K for durations equal to or exceeding 6 h, and melting was observed at 1723 K. The ring-compression and the integral thermal shock tests indicate that, depending on the oxidation time, the ductile to brittle transition threshold - as determined by the ring-compression test - exists between 1623 K and 1723 K. Meanwhile, the fracture threshold - established through the integral thermal shock test - falls between 1573 K and 1673 K. Therefore, taking a conservative approach based on available data, the fracture and non-fracture results from the integral thermal shock tests can define the lower and upper boundaries of the threshold for the loss of coolable geometry of the reactor core during a LOCA.
成川 隆文; 濱口 修輔*; 高田 孝*; 宇田川 豊
Nuclear Engineering and Design, 411, p.112443_1 - 112443_12, 2023/09
被引用回数：0 パーセンタイル：0.01(Nuclear Science & Technology)For realizing a highly reliable fracture limit evaluation of fuel cladding tubes during loss-of-coolant accidents (LOCAs) in light-water reactors, we developed a method to quantify the fracture limit uncertainty of high-burnup advanced fuel cladding tubes. This method employs a hierarchical Bayesian model that can quantify uncertainty even with limited experimental data. The fracture limit uncertainty was quantified as a probability using the amount of oxidation (Equivalent cladding reacted: ECR) and the initial hydrogen concentration (the hydrogen concentration in the fuel cladding tubes before the LOCA-simulated tests) as explanatory variables. We divided the regression coefficients of this model into a hierarchical structure with an overall average term common to all types of fuel cladding tubes and a term representing differences among various types of fuel cladding tubes. This hierarchical structure enabled us to quantify the fracture limit uncertainty through the effective use of prior knowledge and data, even for high-burnup advanced fuel cladding tubes with a small number of data points. The fracture limits representing a 5% fracture probability with 95% confidence of the high-burnup advanced fuel cladding tubes evaluated by the hierarchical Bayesian model were higher than 15% ECR for the initial hydrogen concentrations of up to 700-900 wtppm and restraint loads below 535 N. These fracture limits were comparable to the limit of the unirradiated Zircaloy-4 cladding tube, indicating that the burnup extension and use of the advanced fuel cladding tubes do not significantly lower the fracture limit of fuel cladding tubes. Further, we proposed a method to reduce the fracture limit uncertainty by using non-binary data, instead of the binary data, depending on the condition of the fuel cladding tube specimens after performing the LOCA-simulated test, thereby increasing the amount of information in the data.
成川 隆文; 近藤 啓悦; 藤村 由希; 垣内 一雄; 宇田川 豊; 根本 義之
Journal of Nuclear Materials, 582, p.154467_1 - 154467_12, 2023/08
被引用回数：3 パーセンタイル：95.99(Materials Science, Multidisciplinary)To evaluate the behavior of an oxide-dispersion-strengthened FeCrAl (FeCrAl-ODS) cladding tube under loss-of-coolant accident (LOCA) conditions of light-water reactors (LWRs), the following two laboratory-scale LOCA-simulated tests were performed: the burst and integral thermal shock tests. Four burst and three integral thermal shock tests were performed on unirradiated, stress-relieved FeCrAl-ODS cladding tube specimens, simulating ballooning and rupture, oxidation, and quenching, which were postulated during a LOCA. The burst temperature of the FeCrAl-ODS cladding tube was 200-300 K higher than that of the Zircaloy cladding tube, and the FeCrAl-ODS cladding tube's maximum circumferential strain was smaller than or equal to the Zircaloy-4 cladding tube. These results indicate that the FeCrAl-ODS cladding tube has higher strength at high temperatures than the conventional Zircaloy cladding tube. The FeCrAl-ODS cladding tube did not fracture after being subjected to an axial restraint load of 5000 N, which is more than 10 times higher than the axial restraint load estimated for existing LWRs, during quenching, following isothermal oxidation at 1473 K for 1 h. The FeCrAl-ODS cladding tube was hardly oxidized during this isothermal oxidation condition. However, it melted after a short oxidation at 1673 K and fractured after abnormal oxidation at 1573 K for 1 h. Based on these results, the FeCrAl-ODS cladding tube should not fracture in the time range expected during LOCAs below 1473 K, where no melting or abnormal oxidation occurs.
17 type PWR fuel cladding tube under LOCA-simulated burst conditions古本 健一郎; 宇田川 豊
Journal of Nuclear Science and Technology, 60(5), p.500 - 511, 2023/05
被引用回数：0 パーセンタイル：0.01(Nuclear Science & Technology)In order to contribute to better modeling and evaluation of fuel fragmentation, relocation, and dispersal expected under loss of coolant accident (LOCA) conditions, LOCA-simulated cladding burst experiments were performed on as-received nonirradiated 17 17 type Zircaloy-4 cladding specimens that were internally pressurized. The experiments were designed to terminate at burst occurrence to focus on ballooning and rupture opening formation and to investigate the effects of various factors. The postburst cladding hoop strain decreased with the increase in azimuthal temperature distribution (ATD) of the cladding, as found previously. The rupture opening size increased with the increase in ATD and the increase in energy of the pressurized gas stored inside the pressure boundary of the test sample system. Comparison with the existing database, which included tests on irradiated rods containing fuel pellets, suggested that formation of the rupture opening was influenced by the characteristic behavior of high burnup fuels, such as limited gas migration in the cladding tube due to fuel-cladding bonding and interaction of the ejected fuel fragments with the cladding tube.
pellet in molten Zr cladding伊藤 あゆみ*; 山下 晋; 田崎 雄大; 垣内 一雄; 小林 能直*
Journal of Nuclear Science and Technology, 60(4), p.450 - 459, 2023/04
被引用回数：0 パーセンタイル：0.01(Nuclear Science & Technology)The rapid dissolution of UO in molten Zr that could occur during fuel-cladding liquefaction at high temperatures and its kinetics were reformulated considering the convective mass transfer and the chemical effect at the UO/Zr interface. The mass transfer coefficient of U was obtained as a correlation including the aspect ratio term by CFD analysis. To explain the gap between the rapid dissolution rate observed in the experiments and the density-driven convective mass transfer, we introduced an idea in which the eutectic melting at the UO/Zr interface promotes the grain detachment owing to infiltration of the U-Zr-O liquid into the UO grain boundaries. The developed model was validated with UO-Zr crucible experiments at 2273 and 2373 K. The calculated mass percentage ratios of U/Zr agreed with the measurements and the transition times from rapid saturation to precipitation were consistent with the metallographic observations.
垣内 一雄; 天谷 政樹; 宇田川 豊
Journal of Nuclear Materials, 573, p.154110_1 - 154110_7, 2023/01
被引用回数：0 パーセンタイル：0.01(Materials Science, Multidisciplinary)The irradiation growth behavior of coupon specimens prepared from improved Zr-based alloys for light-water reactor fuel cladding, which have various additive elements and fabrication conditions, was investigated by conducting an irradiation test at 573 and 593 K under typical PWR coolant conditions up to a fast-neutron fluence of 
7.810
(n/cm 
, E 
1 MeV) in the Halden reactor in Norway. Based on the dimensional change data measured at interim and final inspections, the amounts of irradiation growth of the improved Zr-based alloys were formulated from the viewpoint of engineering. The trends of the parameters which express the effects of additive elements on irradiation growth behavior were in good agreement with those previously reported, and it was found that the amount of irradiation growth can be expressed by using a summation rule of the effect of each additive element on irradiation growth.
成川 隆文; 濱口 修輔*; 高田 孝*; 宇田川 豊
Proceedings of Asian Symposium on Risk Assessment and Management 2022 (ASRAM 2022) (Internet), 11 Pages, 2022/12
To realize a more reliable safety evaluation of loss-of-coolant accidents (LOCAs) in light-water-reactors, we developed a quantification method of the fracture limit uncertainty of high-burnup advanced fuel cladding tubes using a hierarchical Bayes model that can quantify uncertainty even when experimental data are limited. The fracture limit uncertainty was quantified as a probability using the amount of oxidation and the initial hydrogen concentration (the hydrogen concentration in fuel cladding tubes before the LOCA-simulated tests) as explanatory variables. The hierarchical Bayes model was developed by dividing the regression coefficients into a hierarchical structure with an overall average term common to all types of fuel cladding tubes and a term representing differences between types of fuel cladding tubes. Using the developed model, we showed that the fracture limits of the high-burnup advanced fuel cladding tubes tended to be on average equal to or higher than that of an unirradiated conventional fuel cladding tube. Further, we proposed a method to reduce the fracture limit uncertainty by using non-binary data depending on the condition of the fuel cladding tube specimens after the LOCA-simulated test instead of the binary data, thereby increasing the amount of information in each data.
垣内 一雄; 天谷 政樹; 宇田川 豊
Annals of Nuclear Energy, 171, p.109004_1 - 109004_9, 2022/06
被引用回数：4 パーセンタイル：78.52(Nuclear Science & Technology)In order to understand the dimensional stability of the fuel rod during long-term use in commercial LWRs, an irradiation growth testing in the Halden reactor of Norway was conducted on various fuel cladding materials including the improved Zr alloy. In this paper, the effect of hydrogen, which was absorbed in the cladding tube due to corrosion, on the irradiation growth behavior was evaluated. Comparison between the specimens with or without pre-charged hydrogen revealed that the effect of hydrogen absorption, accelerating irradiation growth, became significant when the hydrogen content exceeded the hydrogen solubility limit in the corresponding irradiation temperature. Analysis based on this understanding derived growth acceleration effect (0.06
0.01)%/100 ppm, whose denominator is defined as the amount of absorbed hydrogen involved in hydride precipitation under irradiation as a relevant parameter.
成川 隆文
日本原子力学会誌ATOMO
, 63(11), p.780 - 785, 2021/11
冷却材喪失事故時の軽水炉燃料被覆管の破断限界評価の信頼性向上を目指した原子力機構の取り組みとして、ベイズ統計手法による不確かさの定量化手法の開発、並びに燃焼の進展及び被覆管材質の変更の影響評価に関する研究を紹介する。
Soba, A.*; Prudil, A.*; Zhang, J.*; Dethioux, A.*; Han, Z.*; Dostal, M.*; Matocha, V.*; Marelle, V.*; Lasnel-Payan, J.*; Kulacsy, K.*; et al.
Proceedings of TopFuel 2021 (Internet), 10 Pages, 2021/10
The NEA Expert Group on Reactor Fuel Performance (EGRFP) proposed a benchmark on fuel performance codes modeling of pellet-cladding mechanical interation (PCMI). The aim of the benchmark was to improve understanding and modeling of PCMI amongst NEA member organizations. This was achieved by comparing PCMI predictions for a number of specified cases. The results of the two hypothetical cases (1 and 2) were presented earlier. The two final cases (3 and 4) are comparison between calculations and measurements, which will be published as NEA reports. This paper focuses on Case 3, which consists of eight beginning of life (BOL) sub-cases (3a to 3h) each with different pellet designs that have undergone ramping in the Halden Reactor. The aforementioned experiments are known as the IFA-118 experiments and were performed from 1969 to 1970. The variations between cases include four different pellets dimensions (7, 14, 20 and 30 mm of height), two different gapsizes between pellet-cladding (40 and 100 microns) and three variations on pellet face geometry (flat, dishing and dishing with chamfer). Such diversity has allowed exploring the codes sensitivity to these individual factors.
Pham, V. H.; 倉田 正輝; Steinbrueck, M.*
Thermo (Internet), 1(2), p.151 - 167, 2021/09
Since the nuclear accident at Fukushima Daiichi Nuclear Power Station in 2011, a considerable number of studies have been conducted to develop accident tolerant fuel (ATF) claddings for safety enhancement of light water reactors. Among many potential ATF claddings, silicon carbide is one of the most promising candidates with many superior features suitable for nuclear applications. In spite of many potential benefits of SiC cladding, there are some concerns over the oxidation/corrosion resistance of the cladding, especially at extreme temperatures (up to 2000
C) in severe accidents. However, the study of SiC steam oxidation in conventional test facilities in water vapor atmospheres at temperatures above 1600C is very challenging. In recent years, several efforts have been made to modify existing or to develop new advanced test facilities to perform material oxidation tests in steam environments typical of severe accident conditions. In this article, the authors outline the features of SiC oxidation/corrosion at high temperatures, as well as the developments of advanced test facilities in their laboratories, and, finally, give some of the current advances in understanding based on recent data obtained from those advanced test facilities.
永瀬 文久; 成川 隆文; 天谷 政樹
JAEA-Review 2020-076, 129 Pages, 2021/03
JAEA-Review-2020-076.pdf:3.9MB
軽水炉においては、冷却系配管破断等による冷却材喪失事故(LOCA)時にも炉心の冷却可能な形状を維持し放射性核分裂生成物の周辺への放出を抑制するために、非常用炉心冷却系(ECCS)が設置されている。ECCSの設計上の機能及び性能を評価し、評価結果が十分な安全余裕を有することを確認するために、「軽水型動力炉の非常用炉心冷却系の性能評価指針」が定められている。同指針に規定されている基準は1975年に定められた後、1981年に当時の最新知見を参考に見直しが行われている。その後、軽水炉においては燃料の高燃焼度化及びそれに必要な被覆管材料の改良や設計変更が進められたが、それに対応した指針の見直しは行われていない。一方、高燃焼度燃料のLOCA時挙動や高燃焼度燃料への現行指針の適用性に関する多くの技術的な知見が取得されてきている。本報告においては、我が国における指針の制定経緯及び技術的根拠を確認しつつ、国内外におけるLOCA時燃料挙動に係る最新の技術的知見を取りまとめる。また、同指針を高燃焼度燃料に適用することの妥当性に関する見解を述べる。
宇田川 豊; 更田 豊志*
Comprehensive Nuclear Materials, 2nd Edition, Vol.2, p.322 - 338, 2020/08
This article aims at providing a general outline of fuel behavior during a reactivity-initiated accident (RIA) postulated in light water reactors (LWRs) and at showing experimental data providing technical basis for the current RIA-related regulatory criteria in Japan.
成川 隆文; 天谷 政樹
Journal of Nuclear Science and Technology, 57(7), p.782 - 791, 2020/07
被引用回数：6 パーセンタイル：60.71(Nuclear Science & Technology)To evaluate the fracture resistance of high-burnup advanced fuel cladding tubes during the long-term core cooling period following loss-of-coolant accidents (LOCAs), laboratory-scale four-point-bend tests were performed using the following advanced fuel cladding tubes with burnups of 73 - 84 GWd/t: low-tin ZIRLO
, M5
, and Zircaloy-2 (LK3). Three four-point-bend tests were performed on the high-burnup advanced fuel cladding tube specimens subjected to the integral thermal shock tests which simulated LOCA conditions (ballooning and rupture, oxidation in high-temperature steam, and quench). During the four-point-bend tests, all the specimens that were oxidized at 1474 K to 9.9% - 21.5% equivalent cladding reacted exhibited brittle fractures. The maximum bending moments were comparable to those of the conventional Zircaloy cladding tube specimens. Furthermore, the effects of oxidation and hydriding on the maximum bending moment were comparable between the high-burnup advanced fuel cladding tube specimens and the unirradiated Zircaloy-4 cladding tube specimens. Therefore, it can be concluded that the post-LOCA fracture resistance of fuel cladding tubes is not significantly reduced by extending the burnup to 84 GWd/t and using the advanced fuel cladding tubes, though it may slightly decrease with increasing initial hydrogen concentration in a relatively lower ECR range (
15%), as observed for the unirradiated Zircaloy-4 cladding tubes.
谷口 良徳; 宇田川 豊; 天谷 政樹
Annals of Nuclear Energy, 139, p.107188_1 - 107188_7, 2020/05
被引用回数：1 パーセンタイル：12.16(Nuclear Science & Technology)The fuel-failure-limit data obtained in the simulated reactivity-initiated-accident experiment SPERT-CDC 859 (SPERT859) has entailed a lot of discussions if it represents fuel-failure behavior of typical commercial LWRs for its specific pre-irradiation condition and fuel state. The fuel-rod conditions before and during SPERT859 were thus assessed by the fuel-performance codes FEMAXI-8 and RANNS with focusing on cladding corrosion and its effect on the failure limit of the test rod. The analysis showed that the fuel cladding was probably excessively corroded even when the influential calculation conditions such as fuel swelling and creep models were determined so that the lowest limit of the cladding oxide layer thickness was captured. Such assumption of excessive cladding corrosion during pre-irradiation well explains not only the test-rod state before pulse irradiation but also the fuel-failure limit observed. Such understanding undermines anew the representativeness of the test data as a direct basis of safety evaluation for LWR fuels.
and chromia-alumina additive fuels under simulated reactivity-initiated accidents; A Comparative analysis with FEMAXI-8宇田川 豊; 三原 武; 谷口 良徳; 垣内 一雄; 天谷 政樹
Annals of Nuclear Energy, 139, p.107268_1 - 107268_9, 2020/05
被引用回数：3 パーセンタイル：35.51(Nuclear Science & Technology)This paper reports a computer-code analysis on the base-irradiation behavior of the chromia-and-alumina-doped BWR rod irradiated to 64 GWd/t in Oskarshamn-3, Sweden, and subjected to the reactivity-initiated-accident (RIA) test OS-1, which resulted in a fuel failure due to pellet-cladding mechanical interaction (PCMI) at the lowest fuel-enthalpy increase in all the BWR tests ever performed. The inverse calculation which utilized post-irradiation examination data as its constraint conditions revealed that the OS-1 rod had very likely experienced more intense PCMI loading due to higher swelling rate during base irradiation than other BWR rods subjected to previous RIA tests and thus had been prone to experience enhanced radial-hydride formation. The significant difference in the cladding hoop-stress more than 50 MPa discriminates the OS-1 rod from other BWR rods and supports the interpretation that enhanced radial-hydrides formation differentiated the PCMI-failure behavior observed in the test OS-1 from the previous BWR-fuel tests.
成川 隆文; 天谷 政樹
Journal of Nuclear Science and Technology, 57(1), p.68 - 78, 2020/01
被引用回数：2 パーセンタイル：21.58(Nuclear Science & Technology)To evaluate the fracture limit of high-burnup advanced fuel cladding tubes under loss-of-coolant accident (LOCA) conditions, laboratory-scale integral thermal shock tests were performed using the following advanced fuel cladding tubes with burnups of 73 - 85 GWd/t: M-MDA, low-tin ZIRLO, M5, and Zircaloy-2 (LK3). In total eight integral thermal shock tests were performed for these specimens, simulating LOCA conditions including ballooning and rupture, oxidation, hydriding, and quenching. During the tests, the specimens were oxidized to 10% - 30% equivalent cladding reacted (ECR) at approximately 1473 K and were quenched under axial restraint load of approximately 520 - 530 N. The effects of burnup extension and use of the advanced fuel cladding tubes on the ballooning and rupture, oxidation, and hydriding under LOCA conditions were inconsiderable. Further, the high-burnup advanced fuel cladding tube specimens did not fracture in the ECR values equal to or lower than the fracture limits of the unirradiated Zircaloy-4 cladding tube reported in previous studies. Therefore, it can be concluded that the fracture limit of fuel cladding tubes is not significantly reduced by extending the burnup to approximately 85 GWd/t and using the advanced fuel cladding tubes, though it slightly decreases with increasing initial hydrogen concentration.
成川 隆文; 天谷 政樹
Proceedings of International Nuclear Fuel Cycle Conference / Light Water Reactor Fuel Performance Conference (Global/Top Fuel 2019) (USB Flash Drive), p.912 - 921, 2019/09
To evaluate behavior of high-burnup advanced light-water-reactor fuel cladding tubes under loss-of-coolant accident conditions, laboratory-scale isothermal oxidation tests and integral thermal shock tests were performed using the following advanced fuel cladding tubes with burnups of 73-85 GWd/t: M-MDA, low-tin ZIRLO, M5textregistered, and Zircaloy-2 (LK3). The isothermal oxidation tests were performed in steam-flowing conditions at temperatures ranging from 1173 to 1473 K for durations between 120 and 4000 s. The oxidation kinetics of the high-burnup advanced fuel cladding tube specimens was comparable to or slower than that of the unirradiated Zircaloy-4 cladding tube and was slower than that given by the Baker-Just oxidation rate equation. Therefore, the oxidation kinetics is considered to be not significantly accelerated by extending the burnup and changing the alloy composition. During the integral thermal shock tests, the high-burnup advanced fuel cladding tube specimens did not fracture under the oxidation condition equivalent to or lower than the fracture limit of the unirradiated Zircaloy-4 cladding tube. Therefore, the fracture limit of fuel cladding tubes is considered to be not significantly reduced by extending the burnup and changing the alloy composition, though it may slightly decrease with increasing initial hydrogen concentration.
